Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables

Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables

Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables

Package: Rockville RPM870 8 Channel 6000 Watt Powered Mixer with USB, Effects, 8 XDR2 Mic Pre's and Bluetooth + Rockville RMC-3PK 3 Pack Metal Wired Vocal/Instrument/DJ Microphones+Metal Case + (3) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Rockville RPM870 8 Channel 6000w Powered Mixer w/USB, Effects, 8 XDR2 Mic Pres. (1) Rockville RMC-3PK 3 Pack Metal Wired Vocal/Instrument/DJ Microphones+Metal Case. (3) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper.

The Rockville RPM870 is an 8 channel powered console mixer with USB input. There were a few goals we had when designing this mixer. The first one was it had to have the clearest sound quality with the best quality mic preamps. We manufactured this mixer with XDR2 low noise mic preamps. These are some of the best sounding mic pre's on the market.

They compete in quality with any brand on the market! The next goal we had was versatility. We also built in a 24 bit digital effects processor that sounds great. We didn't include 99 effects which all sound the same.

Rather we included 16 solid effects that are each useful. You can customize each effect in the FX control section of the mixer. The last goal was to include a built-in amplifier that is powerful enough for your main speakers so that you can use this mixer for large events with over 500 guests. We tested this and we ran the mixer to (2) Mackie C300Z speakers, and even with the volume turned up half way these were filling an extremely large room with sound! We also tested these with dual 15 DJ speakers and really cranked them and the sound of the highs and lows were crisp and clean.

The great thing about this is the amp does not overheat even when cranking it for hours straight. We rate the RMS very strictly the way famous brands like Mackie rate their items.

We also supply you with program and peak ratings but RMS is the true continuous output power you should look at. Other great features are a dual 7 band master EQ, a 4 band EQ on each channel, an EQ kill switch, and pad and solo buttons on each channel. Rounding things out, we added a USB input that has 2 functions. It can play back your audio tracks.

But what is really cool is that you can record your main mix onto the USB! We also added bluetooth to this mixer to give you all the latest and greatest options. On top of this, we are offering a.

Just be sure to send it back including the original packaging. Rockville RPM870 8 Channel 6000w Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, 48V Phantom Power. 8 Channel mixer section: 6 mono channels, 1 stereo channel.

8 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones. XDR2 mic preamps are low-noise and low distortion. 1 dedicated USB input to play back music or record the main mix. USB supported formats are MP3, WAV, WMA. Built in bluetooth wireless audio streaming.

24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects). Effects level control can adjust signal level of each effect.

FX footswitch input lets you turn your effects on or off. 4-Band EQ (high, high-mid, low-mid, low) per channel.

Each channel is equipped with pad, must, and solo buttons with LED's. Each channel has gain, aux control, FX control, Pan control, Volume control.

Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping. Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch). You can control your monitor mix and check levels through your headphones. Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping.

We recommend lowering the gain if you see these LED's lit up. Power and Output level LED indicators. Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player.

Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R. Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position.

When the pad button is pressed in the gain will adjust from 240dB to 0dB. Solo button allows you to hear the signals through your headphones or to the control room without having to route them to the main mix. This works even with the fader turned down. You can use this to preview channels before they are let into the mix or just to check out a channel during a live performance. You can solo as many channels at a time as you want. Built in cooling fan and ventilation system.

USB input supports unlimited capacity (as many GB as you want). Dimensions: (LWH) 15.16" x 17.72" x 7.09 inches / 38.5 x 45 x 18 cm.

How to Set Up Your RMC-3PK. (3) Fully metal wired mics.

The Rockville RMC-3PK are the same exact microphones we use in our Pro Mic Kit 1 microphone/stand bundle. These microphones were created because we saw a need in the market for a high quality microphone at an affordable price.

We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all. As a result we sent our very own product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all loved. You may be asking yourselves, so what makes these mics sound so good? Our mics use an M-56 cartridge which have neodymium magnets. They have very little background noise, and great tone. The body of the microphone is also something we paid a lot of attention too.

We did not want it to be too light and feel cheap. We made nice solid metal microphones.

They have a great feel to them. We could have gone with plastic or cheaper metal, but we wanted to go with mics that we ourselves would want to use.

Rockville RMC-3PK 3 Pack Metal Wired Vocal/Instrument/DJ Microphones + Metal Case. Frequency Response: 80 - 13Khz. Impedance: 600 Ohms ± 30%. Case: High quality Aluminium carry case protects the mic during transportation. (3) Heavy Duty Standard Size Microphone Clips.

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently.

A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer. The other important factor of a cable is the shielding.

Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable's copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use. Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable.

XLR Connectors with Internal Strain Relief for Rugged Reliability. 100% Copper Conductors for Enhanced Signal Clarity. 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility.

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one.

All replacements and exchanges are free. Item Code: RPM870+RMC-3PK+(3) RCXFM20E-B.

This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Live & Studio Mixers". The seller is "audiosavings" and is located in this country: US. This item can be shipped to United States.
Rockville RPM870 8 Channel 6000w Powered Mixer, USB, Effects+3 Mics+Case+Cables


Home   Sitemap   Contact Form   Privacy Policy   Terms of service